Professional Building Systems, Inc

As an approved independent builder/contractor we work closely with (PBS) Professional Building Systems, Inc. to complete your home building project. PBS is a leading supplier of Modular building components for the East Coast and is essentially our largest sub-contractor.

PBS was founded in 2000 and operates two manufacturing facilities located within one mile of each other in Middleburg, PA. PBS optimizes the 300,000 square feet of production space by producing over 1,000 living units per year.

Modular Construction

Modular construction is the process of systematically building structures as components or sections called “modules”. These modules are constructed within a production facility and then delivered to an intended building site, installed on a foundation, and joined together to form a single permanent structure. The modules can be placed side-by-side, end-to-end, or stacked, allowing a wide variety of configurations and styles in the building layout. Because of the normal delivery and handling process of this off-site construction method, Modular construction is held to a higher building standard through its design and by utilizing more fastening materials than most site-built homes. And in most cases, the interior carpentry of these modules can be as much as 90% complete prior to shipment from the production facility. Vision Home Builders will complete the building site development, foundation, module installation, roof completion, utilities, exterior finishes, mechanical systems, and the balance of the module interior finishes needed to complete your new home.

Manufacturing Process (from the manufacturers perspective)

The modular building process begins as soon as a builder presents their sales representative with a concept. Our design team quickly creates a preliminary plan based on the information provided by the builder. That same information is entered into our sophisticated order entry and design system enabling us to design the structure, as well as produce an accurate estimate for the project. After the plans and order are approved by the builder, full detailed drawings are produced and stamped by a third party engineering agency (or the local inspection agency in the case of a four-story or commercial structure). These plans are then used by the builder to secure a building permit.

Once the building permit has been secured by the builder, the engineering department will begin the detailed production drawings, these drawings will be used to construct the modules. Each module is an important part of the structure and will be combined with the other modules at the site to form a complete building.

We use state-of-the-art technology and the best industry practices throughout the entire construction process. The production process begins by constructing the floor system of the module. The floor system is built on a “jig” keeping it square and plumb. Once the floor system is complete the pre-constructed wall panels (also built on a jig) are added. The roof system is now ready to be set in place, thus completing the structure portion of the module.

The electrical wiring and plumbing are inserted into the module both during the general construction of the structure and after the construction of the structure is complete. The exterior walls are then insulated and covered with sheathing. Sanding and painting are next and in the final stages of production, items such custom cabinetry, fixtures, flooring, molding and trim are installed. A final quality assurance inspection is performed to ensure the module is complete. After passing the final inspection the module is wrapped in a durable plastic to protect it against the elements and loaded onto a carrier in preparation for transporting it to the building site.

Modular construction is superior to site-built construction in many ways some of which include; the additional material used in building the structure, a controlled building environment, less waste and damage of materials, a rigid inspection process and the overall speed of the construction. The building codes and materials used in modular construction are the same or more stringent then in site-built construction. We are confident that the structure produced in our facility is stronger and more energy-efficient than most site-built structures.

Hours

MON......8am-5pm
TUE.......8am-5pm
WED......8am-5pm
THUR....8am-5pm
FRI........8am-5pm
SAT.......10am-2pm
SUN......By Appointment
After Hours Available By Appointment

Review Us

Address:
3820 Columbia Blvd
Bloomsburg, PA 17815

(570) 784-0404

Follow us on social media

PA Contractor # PA115377